Compact Primary and Backup Pump System
- Stainless Steel pump housing
- Heavy-duty, energy efficient, PSC motor with thermal overload protection
- Lubricated ball bearings and shaft seal for long life
- High flow battery backup DC pump with stainless steel housing and top suction design
Where to buy
The Westinghouse 1/2 HP compact primary and battery backup pump system is designed to protect basements from flooding during power outages or High-water volume instances. Its durable stainless steel and cast-iron design provide you with the comfort to know Westinghouse Compact primary and Backup pump system are continually working to protect your family’s biggest asset
The Westinghouse 1/2 HP compact primary and battery backup pump system is designed to protect basements from flooding during power outages or High-water volume instances. Its durable stainless steel and cast-iron design provide you with the comfort to know Westinghouse Compact primary and Backup pump system are continually working to protect your family’s biggest asset
Specifications
| Application | Submersible sump pump for typical residential applications |
| Voltage | 115 |
| Hertz | 60 |
| Phase | Single |
| Rpm | 3450 RPM |
| Motor type | Permanent Split Capacitor (PSC) |
| Circuit requirements | 15 Amp |
| Duty rating | Continuous, (For Continuous, the water depth must be at least 6" to prevent the motor from overheating) |
| Shaft seal | Oil Seal |
| Motor shaft | Stainless Steel |
| Motor bearing | Ball Bearing |
| Cooling | Oil Cooled |
| Motor protection | Auto reset thermal overload protector |
| Discharge size | 1-1/2”FNPT (with 1-1/2” Quick Connect Fitting) |
| Cord length | 10' |
| Cord type | SJTW 18AWG/3C, UL List |
| Pump housing | Stainless Steel |
| Pump base | Cast Iron |
| Impeller material | Reinforced thermoplastic |
| Gasket | Rubber |
| Solids handling | 1/4" Spherical |
| Liquid temp range | 32-95F |
| Operation | Automatic/Non-automatic |
| Fasteners | Stainless Steel |
| Switch type | Vertical |
| Switch on point | 8.8" |
| Switch off point | 4.5" |
| Horsepower | 120W |
| Voltage (backup pump) | 12V |
| Shaft seal (backup pump) | Oil Seal |
| Motor shaft (backup pump) | Stainless Steel |
| Motor bearing (backup pump) | Ball Bearing |
| Circuit requirements (backup pump) | 20 AMP |
| Discharge size (backup pump) | 1-1/2” FNPT (with 1-1/2” Quick Connect Fitting) |
| Cord length (backup pump) | 10' |
| Cord type (backup pump) | SJTW 16AWG/2C |
| Motor housing (backup pump) | Stainless Steel |
| Pump base (backup pump) | Cast Iron |
| Impeller material (backup pump) | Reinforced thermoplastic |
| Solids handling (backup pump) | 1/4" Spherical |