3/4 HP Submersible Sump Pump
- Heavy-duty, energy efficient, PSC motor with thermal overload protection
- Lubricated ball bearings and shaft seal for long life
- Motor encased in dielectric oil for rapid cooling
- Polycarbonate Impeller
Where to buy
The Westinghouse 3/4 HP Stainless-steel submersible sump pump is a powerful stand-alone primary pump with a high capacity and energy efficient motor. It’s stainless-steel top and cast-iron base allow it to move a high volume of water. Its top suction design reduces the opportunity for airlock, and debris. The Westinghouse 3/4 HP primary pump is best suited for homes with high water volume.
The Westinghouse 3/4 HP Stainless-steel submersible sump pump is a powerful stand-alone primary pump with a high capacity and energy efficient motor. It’s stainless-steel top and cast-iron base allow it to move a high volume of water. Its top suction design reduces the opportunity for airlock, and debris. The Westinghouse 3/4 HP primary pump is best suited for homes with high water volume.
Specifications
| Application | Submersible sump pump for typical residential applications |
| Voltage | 115 |
| Amps | 10 |
| Hertz | 60 |
| Phase | Single |
| Rpm | 3450 RPM |
| Motor type | Permanent Split Capacitor (PSC) |
| Insulation | Class B |
| Circuit requirements | 15 Amp |
| Duty rating | Continuous, (For Continuous, the water depth must be at least 6" to prevent the motor from overheating) |
| Shaft seal | Rubber and Stainless Steel |
| Motor shaft | Stainless Steel |
| Upper motor bearing | Ball Bearing |
| Lower motor bearing | Ball Bearing |
| Cooling | Oil Cooled |
| Motor protection | Auto reset thermal overload protector |
| Discharge size | 1-1/2" NPT & 1-1/4" NPT |
| Cord length | 10' |
| Cord type | SJTW 18AWG/3C, UL List |
| Pump housing | Stainless Steel |
| Pump base | Cast Iron |
| Impeller material | Reinforced thermoplastic |
| Gasket | Rubber |
| Solids handling | 1/4" Spherical |
| Liquid temp range | 32-95F |
| Operation | Automatic/Non-automatic |
| Fasteners | Stainless Steel |
| Maximum flow rate | 100 GPM |
| Maximum head | 30 Ft |
| Maximum pressure | 13.3 PSI |
| Model no. | SPS07502VD |
| Hp | 3/4 |
| 0' | 6000 |
| 5' | 5500 |
| 10' | 5100 |
| 15' | 4650 |
| 20' | 4100 |
| 25' | 3400 |
| Max lift | 30' |
| Type | Vertical |
| Switch on point | 9.2" |
| Switch off point | 4.9" |
| Material | Reinforced thermoplastic |
| Sump basin | Min. 10 in. (254 mm) diameter, 14 in. (356mm) depth |